Bio-decontaminate equipment, small areas, and large rooms too with Ecolab’s Bioquell L-4. This versatile, multi-purpose bio-decontamination system is easy to set up and operate.
We'll work with you to design the best configuration for your space and provide all of the the accessories and connections you need to get your system up and running.
Reduce microbiological contamination on your equipment, and in open spaces and rooms with the multipurpose Bioquell L-4. You can optimize this versatile system with:
Use the Bioquell L-4 to bio-decontaminate:
Uses Bioquell Hydrogen Peroxide Sterilant to create hydrogen peroxide vapor that achieves a 6-log sporicidal reduction on surfaces within an enclosed area.
EPA Reg. No. 72372-1-86703
Easy set up and operation. System can be run at room temperature—no need for a time-consuming dehumidification phase before starting a bio-decontamination cycle.
Connective capability allows for integration with more complex systems. Customize with add-on Bioquell accessories.
Full validation including equipment commissioning and IQ, OQ, GCD and PQ.
Bio-decontaminate isolators, lyophilizers, BSCs and other equipment.
Add Bioquell’s optional distribution head to bio-decontaminate rooms up to 350m3.
The optional booster fan gives your system extra capacity to bio-decontaminate large filter bank enclosures in less time and with reduced hydrogen peroxide consumption.
Our rapid aeration technology connects to the Bioquell L-4 to help remove hydrogen peroxide vapor after a bio-decontamination cycle. This can reduce cycle times.
Give your Bioquell L-4 even greater range. This optional accessory expands the system's capabilities from bio-decontaminating equipment and enclosures to treating a full room.
Give your system extra capacity to bio-decontaminate large filter bank enclosures in less time, and with reduced hydrogen peroxide consumption.
Bioquell Hydrogen Peroxide Sterilant
This is a 35% aqueous hydrogen peroxide solution used in Bioquell technology to generate hydrogen peroxide vapor, which achieves a 6-log sporicidal kill on exposed surfaces.
EPA Reg. No. 72372-1-86703
Our biological indicators are made from Geobacillus stearothermophilus endospores to help you validate a Bioquell decontamination cycle. Easily confirm that you've achieved a 6-log sporicidal kill.
Confirm that a Bioquell cycle has achieved the expected vapor distribution and exposure performance with these easy-to-read chemical indicators. A chemical strip reacts to a Bioquell cycle and changes color to correlate with the cycle's expected efficacy. For use in rooms and enclosed areas 10m3 and larger.
To meet regulatory requirements, you may need to deliver proof that your bio-decontamination solution performs as it should. Ecolab provides trained engineers and the validation documentation you need to comply with regulations.
Bioquell Hydrogen Peroxide Sterilant vapor is tough on microbial surface contaminants, but has no ill effects on sensitive electronics. Unlike some spray-and-wipe methods, there are no additional steps to remove residue. When you need to bio-decontaminate spaces that contain hard-to-clean equipment, Bioquell is ideal. Before using Bioquell on your electronic equipment, check with the manufacturers to confirm compatibility.
EPA Reg. No. 72372-1-86703
What is the maximum room size the Bioquell L-4 can decontaminate?
With the optional distribution head, the Bioquell L-4 can be used to decontaminate rooms up to 350.
Can I connect this to my Building Management System?
Yes.
Ecolab Life Sciences
1 Ecolab Place
St. Paul, MN 55102
Please speak to your Ecolab account manager for further information.
Or call: +1-800-659-3764.
