The Bioquell Qube is a configurable isolator integrated with Bioquell Hydrogen Peroxide Sterilant (EPA Reg. No. 72372-1-86703). From its unique design to rapid cycle times, the Bioquell Qube helps ensure your aseptic workspace needs are met for a safe and productive working environment.
Bioquell Qube
Bioquell Qube is Ideal for:
- Sterility testing
- Cleanroom contamination control
- Small batch production
- Drug compounding
- Cytotoxic and hazardous drug preparation
Why Choose The Bioquell Qube
Rapid
Rapid
A bio-decontamination cycle can be complete in as little as 20 minutes, depending on load specifications. After you order the Bioquell Qube, installation and validation is complete in as few as 12 weeks.
Adaptable
Adaptable
Up to 3 chambers (2 gloves per chamber) and 2 material transfer areas to meet your workflow needs. Positive and negative pressure capabilities.
Assured
Assured
Customized validated cycles support ISO 5/EU Grade A environment; GMP compliance; unidirectional airflow in accordance with GMP Annex 1; 21-CFR Part 11-compliant data-logging software available.
Efficient
Efficient
Four levels of environmental monitoring for your viable and nonviable particle needs. Ability to incorporate the Merck Millipore Sigma Symbio Flex Sterility Pump.
Integrated
Integrated
Built-in Bioquell hydrogen peroxide vapor technology for repeatable bio-decontamination results. Easy-to-use touch-screen. No HVAC connection required.
Productive
Productive
Bio-decontaminate materials in the main chamber while you work in another. Typical aseptic-hold retention is 7 days — customize this timing to your protocols.
Watch the Bioquell Qube in Action
Cleanroom Therapy
The risk and financial impact of microbial contamination is exceptionally high during the cell-production procedure, making aseptic conditions essential to the handling of cell samples. Performing as many steps as possible under isolation and following effective disinfection is the safest method. Our flexible bio-decontamination solutions help you to maintain a secure environment free of microbiological contaminants so you can develop and advance leading therapies and treatments.
Pharmaceutical Manufacturing and Compounding
Stringent manufacturing and compounding conditions call for leading bio-decontamination solutions. Whether operated by your staff members or one of our expert onsite technicians, our fixed and portable hydrogen peroxide vapor bio-decontamination systems kill organisms on surfaces in your pass-throughs, airlocks and other areas for total working efficacy.
Research and Laboratory
We understand biological safety is key to your research processes. That’s why Bioquell from Ecolab offers flexible bio-decontamination solutions for research facilities both large and small, allowing you to lead the way without a contaminant slowing you down. From your benchtop to your entire workspace, our mobile and built-in systems reduce your bioburden at every step of your workflow.
Biotechnology and Drug Development
The strict and continual application of aseptic processing, environmental controls and monitoring are key to the approval and success of your final drug or product as a leading solution. With Bioquell’s automated, validated bio-decontamination, you have confidence in your bioburden reduction of your workspace and enhancements for sterility testing.
Related Products and Accessories
Environmental Monitoring
Monitor aseptic environmental conditions with four modes, ranging from manual to fully integrated particle monitoring with both viable and nonviable particle-counting options.
Sterility Test Pump
If you choose the largest Qube option with three chambers, you can add up to two integrated Merck Millipore Steritest Symbio Flex sterility test pumps. This helps to simplify operations and free up workspace.
Glove Sleeve System
Our patented glove sleeve system removes creases in both the sleeve and the glove during bio-decontamination. Includes smaller and lighter Safe Change Cuff Rings. Design helps ensure that all areas of the Bioquell Qube are bio-decontaminated.
Rapid Transfer Port
Aseptic transfer of materials in and out of isolators with no break of containment or effect on ambient characteristics. Available in both 190mm and 270mm.
Validation
Validation
Our technical experts can install and validate the Bioquell Qube in as quickly as two weeks in most instances.
Because the Bioquell Qube is easy to maneuver and fast to assemble, you often do not need any construction or electrical alterations to install. It can fit through 800mm (32-inch) door frames to be built directly in the designated area. It requires only a standard electrical outlet to function and, for positive pressure users, does not require connection to HVAC.
Validation includes training, installation, operational and performance qualification (IQ, OQ and PQ), validated cycles based on custom-load configurations, and all appropriate documentation.
FAQs About the Bioquell Qube
Do you offer 21-CFR Part 11 compliance?
Yes, we offer an optional data logger for this purpose.
Can I bring tubing or cables into the Bioquell Qube?
We have an option for fitting a floor-mounted one-inch triclover port in each chamber. This allows you to bring in liquid lines or cables securely into the body of the Bioquell Qube.
Can you set alarms for the temperature inside the Bioquell Qube?
Yes.
Are there different leak tests programmed for the Bioquell Qube?
Yes, there are leak tests programmed for both positive and negative pressure.
What sets the Bioquell Qube apart from traditional stainless steel options?
The Bioquell Qube is constructed of tough and hard-wearing polypropylene. Because of its construction, the Bioquell Qube can be installed and validated within 12 weeks and, in most cases, with minimal invasiveness to your operation or workflow.
Can you set alarms for the temperature inside the Bioquell Qube?
Yes.
If I want to change pressure from positive to negative, do I need to change the filters or take any additional action to ensure it is safe to use?
The Bioquell Qube can be switched between pressure regimes using the touchscreen; no additional changes are needed.
Are there different leak tests programmed for the Bioquell Qube?
Yes, there are leak tests programmed for both positive and negative pressure.
Get In Touch with Us
Give Us a Call
Ecolab Life Sciences
1 Ecolab Place
St. Paul, MN 55102
Please speak to your Ecolab account manager for further information.
Or call: +1-800-659-3764.